Interdent

AQUAMAT

Aquamat is used for polymerization of acrylic plastics. The unit is designed for work in dental laboratories. It can work without heating so it can also be used as a pressue chamber. The polymerization unit has two working temperature zones which means that it can be heated at two stages. This device has been designed according to the requirements of latest industrial standards.

TECHNICAL DATA
Electrical supply	~230 V, ±10%, 50Hz
Power consumption	1220 W
Category of over tension	ІІ
Effective volume of the chamber	1,5l
Interior dimensions	Ф140 mm; h=145 mm
Maximum operating pressure	6 Bar
Limits set for the working temperature	40°С - 125°С
Operating temperature zones	2
Limits set for the time	1min – 99min
Overall dimensions (WxLxH) in mm	300 x 330 x 240
Model Weight	9,3 кg
Working temperature	5°С - 40°С
Level of environment pollution	2
The device is designed for usage in normal dental laboratories up to 2000m altitude above sea level.
The maximum relative humidity of the air must be 80% for temperatures up to 31°С, decreasing lineally to 50% relative humidity for temperature of 40°С.

AQUAMAT pdf

AQUAMAT pdf

#	Picture	Article	Packing
689		Aquamat	1 pcs

# 689

Aquamat

Pakiranje: 1 pcs

Interdent

AQUAMAT

CAD/CAM CENTER

EDUCATION

SUPPORT

SHOP

Interdent

AQUAMAT

User Manual

Declarations of conformity