Education

All education
  • Participants opinions
    I often attend Interdent's vocational training because the theoretic work is always followed by a practical workshop. The information about new materials and procedures is just as interesting as lectures that improve the knowledge.
    Domen Gros, D. M. D.,
    Ordinacija Gros
    • Participants opinions
      I'm very happy with the course and the knowledge i gained and pleasant gathering with colleagues we had! I look forward to seeing everyone again!
      S. Anđelković,
      S. Anđelković
      • Participants opinions
        It is a great pleasure to learn from you.
        Jelena Korica,
        Ordinacija Florjančič
        • Participants opinions
          Very professional, full of new ideas. After many years of work, knowledge still has to be upgraded. Interdent workshops have professional lecturers and professional staff. I am very pleased that I can upgrade my knowledge here.
          Mateja Bašl,
          Zob. lab. Darko Bašl
          • Participants opinions
            For the first time I was on one of the many courses that take place in Celje, about which I have been regularly informed and in each one I see a challenge. I am excited and all my expectations are fulfilled because this is the only right way to learn and acquire knowledge. I will definitly come back again!
            Dragana Ninković,
            ARTLAB

            All education

            Sort By:
            2. 10. - 3. 10. 2020 IAS Academy – ClearSmile Aligner Light and Inman Aligner Light
            This certification course covers all aspects of the treatment from diagnosis, assessment, case evaluation, to fitting then retention. This is so attendees will be able to handle simple to moderate cases immediately. It is proven that getting started quickly will help you to introduce the Inman and clear aligner treatment into your practice. You are supported every step of the way with an online mentoring system where your cases are checked for suitability, your records are assessed, and help can be given at any point through the treatment. Three monitored cases are treated as part of your certification
            More
            21. 10. - 23. 10. 2020 Precision casting and metal ceramic - basic course
            The course is intended for dental technicians who want to troubleshoot porous and inhomogeneous castings and who would like to learn the basic rules of ceramics use and framework for the ceramic layering preparation. Through the course the Vita VMK Master ceramic system will be presented and basic techniques of layering, with emphasis on correct preparation of the framework and most common mistakes that often occur in practice (ceramic fractures, frog eye ...).
            More
            12. 11. - 14. 11. 2020 Biologic concept of total dentures
            The course is recommended to team dentist - dental technician, as well as to individuals who are aware that the replacement of natural teeth, selection of the artificial ones, and loss of bone parts is a demanding clinical and laboratory procedure in prosthetic patient`s care. It is necessary to reconstruct and establish a balance between function and aesthetics. Participants will learn about the Dr. Eugene End`s Bio-logical concept.
            More
            26. 11. 2020 Endodontics with Reciproc system and Guttafusion
            The workshop is intended to dentists who want to discover the easy, safe and time efficient system for machanical preparation of root canals and at the same time to learn as many practical and useful tips from everyday practice.
            More
            Dates by appointment Wax up your skills - Morphology
            The course is intended for all dental technicians who wish to further their knowledge in the field of morphology and gnatology, which is the basic foundation of all modeling in wax, ceramics and digital technology. Using Artistic wax aesthetic modeling waxes that contain waxes in the same colors as for ceramic effects. The course also provides a very good foundation for anyone who wants to get started with ceramics.
            More
            Dates by appointment CAD/CAM scanning and designing
            The course is aimed to those who have made the purchase of the scanner Identica Blue or Identica Hybrid and software (SW) ExoCad and would like to learn basics of scanning and designing.
            More
            Dates by appointment CAD/CAM – scanning, designing and milling
            The course is aimed to those who have made the purchase of the scanner Identica Blue or Identica Hybrid, software (SW) ExoCad and milling unit CC Power, CC Cosmo/Star, CC Trendy and would like to learn basics of scanning, designing and milling.
            More
            2. 10. - 3. 10. 2020 IAS Academy – ClearSmile Aligner Light and Inman Aligner Light
            This certification course covers all aspects of the treatment from diagnosis, assessment, case evaluation, to fitting then retention. This is so attendees will be able to handle simple to moderate cases immediately. It is proven that getting started quickly will help you to introduce the Inman and clear aligner treatment into your practice. You are supported every step of the way with an online mentoring system where your cases are checked for suitability, your records are assessed, and help can be given at any point through the treatment. Three monitored cases are treated as part of your certification
            More
            12. 11. - 14. 11. 2020 Biologic concept of total dentures
            The course is recommended to team dentist - dental technician, as well as to individuals who are aware that the replacement of natural teeth, selection of the artificial ones, and loss of bone parts is a demanding clinical and laboratory procedure in prosthetic patient`s care. It is necessary to reconstruct and establish a balance between function and aesthetics. Participants will learn about the Dr. Eugene End`s Bio-logical concept.
            More
            26. 11. 2020 Endodontics with Reciproc system and Guttafusion
            The workshop is intended to dentists who want to discover the easy, safe and time efficient system for machanical preparation of root canals and at the same time to learn as many practical and useful tips from everyday practice.
            More
            21. 10. - 23. 10. 2020 Precision casting and metal ceramic - basic course
            The course is intended for dental technicians who want to troubleshoot porous and inhomogeneous castings and who would like to learn the basic rules of ceramics use and framework for the ceramic layering preparation. Through the course the Vita VMK Master ceramic system will be presented and basic techniques of layering, with emphasis on correct preparation of the framework and most common mistakes that often occur in practice (ceramic fractures, frog eye ...).
            More
            12. 11. - 14. 11. 2020 Biologic concept of total dentures
            The course is recommended to team dentist - dental technician, as well as to individuals who are aware that the replacement of natural teeth, selection of the artificial ones, and loss of bone parts is a demanding clinical and laboratory procedure in prosthetic patient`s care. It is necessary to reconstruct and establish a balance between function and aesthetics. Participants will learn about the Dr. Eugene End`s Bio-logical concept.
            More
            Dates by appointment Wax up your skills - Morphology
            The course is intended for all dental technicians who wish to further their knowledge in the field of morphology and gnatology, which is the basic foundation of all modeling in wax, ceramics and digital technology. Using Artistic wax aesthetic modeling waxes that contain waxes in the same colors as for ceramic effects. The course also provides a very good foundation for anyone who wants to get started with ceramics.
            More
            Dates by appointment CAD/CAM scanning and designing
            The course is aimed to those who have made the purchase of the scanner Identica Blue or Identica Hybrid and software (SW) ExoCad and would like to learn basics of scanning and designing.
            More
            Dates by appointment CAD/CAM – scanning, designing and milling
            The course is aimed to those who have made the purchase of the scanner Identica Blue or Identica Hybrid, software (SW) ExoCad and milling unit CC Power, CC Cosmo/Star, CC Trendy and would like to learn basics of scanning, designing and milling.
            More
            Dates by appointment Planning of partial dentures with a molded base
            The lecture is suitable for dentists and dental technicians who would like to refresh their knowledge about planning partial denture elements. The lecture will explain the basics of biomechanics, operation of forces and moments that occur when chewing with removable partial dentures and are important for its function.
            More
            Dates by appointment Attachments as an aesthetic-functional solutions to everyday practice - combined work basic course
            The course is suitable for dental technicians who would like to learn about the basics of milling techniques, proper handling with different kinds of attachements, as well as about proper use of all the materials used in the entire process of combined work. The course will present a quick, orderly and easy manufacturing process of economically acceptable combined work. All participants must have a basic knowledge about fixed prostheses and partial dentures.
            More

            Gallery